CCI’s Curable Reducer is a 100% curable reducer that is designed to be added to plastisol inks to reduce viscosity and create a softer hand.

ADVANTAGES

• Softer Hand

• Utilize Higher Mesh Counts for Finer Print Detail

• Modifies the Flow and Printing Characteristics of the Ink

• CPSIA Compliant (Consumer Product Safety Improvement Act)

• Phthalate Free

• Easy to Work With, Mixes in Easily

• Non-Hazardous

• Does Not Affect Color (Dulling of Ink)

• Does Not Affect Curing

  APPLICATION:

  Recommended starting point is 2%-5% (by weight) to the plastisol ink. Depending on the ink, you may add up to 10% before affecting the inks opacity. However, it is always recommended that you do a test print to check opacity, wash fastness, bleed, and color strength after any reducer is added.

  FLASHING:

  Parameters vary between all flash units. Flash for 2-3 seconds so that the ink deposit reaches 150-250°F (65-121°C)

  CURING:

  Cure at 325°F (162°C) over a 60-90 second period depending on oven type and thickness of ink deposit. A thicker deposit will take longer to cure as the heat must penetrate through the entire ink layer.